This is automatic capsule placing & crimping machine, this machine is suitable for plastic capsule, aluminum foil capsule or tin foil cap onto corked bottles for shrinking then heat and shrink plastic capsules on glass bottles.
Automatic Wine Bottle Capsules Crimping Machine
Features:
1, This machine is for glass bottle cap placing-capsule shrinking 2 in1 machine. It is also able to be changed into separated machine according to actual requirements.
2, This machine could save place for plant to improve utilization of your factory.
3, It is of highly automatic degree to save labor work and reduce labor cost.
4, Only capsule/foil caps loading requires manual work. Piled capsule/foil caps will need to be put onto the storage plate one by one according to the predetermined direction.
5, For all kinds of capsule caps, including PVC capsule, aluminum foil caps, tin foil hat, the automatic capsule feeding, capsule distributor and capsule placer are all general-used devices. Machinery and pneumatic works coordinately.
6, Each section of the monobloc are using mechanical synchronous drive, ensuring exact cap distributing, perfect capsule placing and easy adjusting on rolling/heat-shrinking.
7, This machine is controlled by intelligent control system to coordinate working of all units. There are bottle collecting sensor and bottle stopper before the machine’s bottle inlet screw. When bottles reach the collecting sensor on the conveyor, the bottle stopper will start to release bottles. Then the bottle sensor on the inlet screw find a bottle, the capsule distributing and placing devices will be started accordingly. When there is no bottle being detected by the bottle collecting sensor, or when hind machine/devices gives our fault signals, the bottle stopper will stop bottles from going into the machine. The machine will stop running after finishing with all bottles which have entered the inlet screw before the signals.
8, Height of the machine could be adjusted. All corollary and supporting equipment are easy to be set up and adjusted.
9, Due to health and safety issues, limit switches are installed to stop the machine when the door of the machine is opened.
10, Siemens electronics is widely used in the machine, including PLC, touch screen and frequency convertors.
11, If bottles are stuck in this machine, overload clutch protection device will be activated to shut down the machine to protect bottles and the machine.
Parameters:
| Items | Parameters |
| Capacity | 1000BPH |
| Cap placing heads | 4pcs |
| Heat-shrinking heads | 1pcs |
| Allowed bottle height | 250-370mm |
| Allowed bottle diameter | Φ60-Φ100mm |
| Allowed cap dimensions | Φ22-Φ32mm |
| Air speed & pressure | 2m³/h, ≥0.6MPa |
| Weight | 1650KG |
| Dimensions | 3200*1330*2240mm |
Details
Effect
